User manual

DAP-1155 Wireless N 150 Access Point & Router

User Manual

Configuring Device (Router Mode)

Parameter Description

IP Address Enter an IP address for this WAN connection.

Netmask Enter a subnet mask for this WAN connection.

Gateway IP address Enter an IP address of the gateway used by this WAN connection.

Primary DNS server/

Secondary DNS server

Enter addresses of the primary and secondary DNS servers in the

relevant fields.

Miscellaneous

Enable RIP

Select the checkbox to allow using RIP for this connection.

Enable IGMP Multicast

Select the checkbox to allow multicast traffic from the external

network (e.g. video streaming) to be received.

NAT

Select the checkbox if you want one WAN IP address to be used for

all computers of your LAN.

Firewall

Select the checkbox to enable protection against ARP and DDoS

attacks.

Ping

Select the checkbox to allow the access point to answer ping

requests from the external network through this connection. For

security reasons, it is recommended not to select this checkbox.

When all needed settings are configured, click the Save button.

Page 138 of 215