User manual

22D-Link DAP-1150 User Manual
Section 3 - Conguration
This section will allow you to change the local network settings of the AP and to congure the DHCP settings.
LAN Setup
Enter the IP address of the AP. The default IP
address is 192.168.0.50.
If you change the IP address, once you click
Apply, you will need to enter the new IP
address in your browser to get back into the
conguration utility.
Enter the Subnet Mask. The default subnet
mask is 255.255.255.0.
Enter the Domain name (Optional).
Check the box to transfer the DNS server
information from your ISP to your computers.
If unchecked, your computers will use the AP
for a DNS server.
AP IP Address:
Default Subnet
Mask:
Local Domain
Name:
Enable DNS
Relay:
Refer to the next page for DHCP information.