User manual
12D-Link DAP-1150 User Manual
Section 3 - Conguration
Conguration for AP Mode
Web-based Conguration Utility
1. Open the web browser
2. Type in the ip address of the
DAP-1150.(192.168.0.50)
If you wish to change the default settings or optimize the performance of the DAP-1150, you may use the configuration
utility that D-Link has included a configuration utility for this purpose.
After you have completed the initial installation, you can access the configuration menu, at any time, by opening the
web-browser and typing in the ip address of the DAP-1150. The DAP-1150’s default ip address is shown below:
3. Type admin in the User Name
eld
4. Leave the Password blank
5. Click OK