User manual
45D-Link DAP-1150 User Manual
Section 3 - Conguration
Advanced Wireless
Select the transmission rate for the network.
Choose 100%, 50%(-3dB), 25% (-6dB), or
12.5% (-9dB).
This value should remain at its default setting of 2,346. If you experience a high packet error rate, you may slightly
decrease your fragmentation threshold within the value range of 256 to 2,346. Setting the fragmentation threshold too
low may result in poor performance.
TX Rates:
Transmit Power:
Beacon Interval:
Fragmentation:
Beacons are packets sent by an access point
to synchronize a wireless network. Specify a
beacon interval value. The default value 100
is recommended.
DTIM Interval
(Beacon Rate):
Mode Setting:
Preamble Type:
A DTIM (Delivery Trafc Indication Message) is a countdown informing clients of the next window for listening to broadcast
and multicast messages. The default vaule is 3 and the possible range of vaules is between 1 and 255.
For the fastest speed, select G Mode to include only 802.11g devices in your network. Select Mixed Mode to include
802.11g and 802.11b devices in your network.
RTS Threshold:
This value should remain at its default setting
of 2,432. If you encounter inconsistent
data ow, only minor modications to the
value range between 256 and 2,432 are
recommended.
Select Short or Long Preamble. The default setting in Long Preamble. The Preamble denes the length of the CRC block
(Cyclic Redundancy Check is a common technique for detecting data transmission errors) for communication between
the access point and roaming wireless network adapters. Note: High network trafc areas should use the short preamble
type.
WMM:
WMM (Wi-Fi Multimedia) is only available in Access Point Mode. WMM provides basic QoS (Quality of Service) functions
for wireless networks. WMM prioritizes trafc based on the 4 AC (Access Categories) of voice, video, best effort, and
background. However, WMM does not provide guaranteed throughput.