User manual
44D-Link DAP-1150 User Manual
Section 3 - Conguration
The DAP-1150 is set to Dynamic IP by default.
. The IP address and subnet mask will fallback
to 192.168.0.50 and 255.255.255.0, if don’t
get IP address from DHCP server exceed 30
seconds.
Select this option if you are manually assigning
an IP Address.
LAN Settings
Enter the IP address of the access point.
My LAN
Connection is:
Static IP:
Dynamic IP:
IP Address:
Select this option if you would like to have an
IP Address automatically assigned to the DAP-
1150 by a DHCP server in your network.
Subnet Mask:
Gateway
address:
Enter the subnet mask of your access point.
Enter the IP Address of the router in your network.
Device
Name(NetBIOS
Name):
It allows you to congure this device more easily when your network using TCP/IP protocol. You can enter the device
name of the AP into your web browser to access the instead of ip address for conguration.