User manual
39D-Link DAP-1150 User Manual
Section 3 - Conguration
Access Point
Wireless
Network Name
(also called the
SSID):
The Wireless Network Name is a unique name
that identies a network. All devices on a network
must share the same wireless network name
in order to communicate on the network. If you
decide to change the wireless network name
from the default setting, enter your new wireless
network name in this eld.
Site Survey:
Wireless
Channel:
Enable Auto
Channel Scan:
This button is unavailable in Access Point
mode.
Auto channel selection is the default setting. First
disable Auto Channel Scan (see below) and you
will be able to select a wireless channel.
Check the box to enable Auto Channel Scan.
Enable this feature to auto-select the channel
for the best wireless performance.
Enable Hidden
Wireless:
Check the box if you do not want the SSID to be
broadcast by the DAP-1150. This prevents the
SSID from being seen by site survey utilities,
so any wireless clients will have to be pre-
congured with the SSID of the DAP-1150 in
order to connect to it.
In AP mode, the DAP-1150 acts as a central connection point for any computer (client) that has an 802.11g or backward-compatible
802.11b wireless network adapter and is within range of the AP.
Wireless
Security Mode:
Select a wireless security setting. Options are None, WEP, WPA, WPA2, or WPA2-Auto. See p.53 of this manual for a
detailed explanation of the wireless security options.
Wireless Setup