User manual
79D-Link D-ViewCam User Manual
Appendix A - Wireless Basics
Save and Copy to Setting
20. Why do we need to use “Save Setting” and “Copy to” functions in D-Link D-ViewCam?
These two functions are designed to let users configure cameras efficiently. Camera configurations such as: Area
setting, map file, device ratio, configurations in Camera Setting, Image Alarm Setting, Preset, eMap location and
sensor alarm setting can all be saved and copy to another camera. However, please remember to review the settings
of the target camera after “copy to” to make sure all settings are correct and work as intended.
Storage Space Setting
21. What will happen when my hard disk or network storage device is running out of space?
When your hard disk or network storage device is approaching 90% full, and if you have enabled the Recycle function,
the system will automatically start to delete the oldest recorded video on your hard disk or network storage to make
space for the new les.
To prevent losing recorded video data, please remember to periodically back up your recorded video les and delete
the unwanted ones.
For details on how to use this function, please refer to page 36.
22. How to congure the schedule recording, event recording, manual recording path?
To avoid system failure due to insucient disk space, please congure the recording path for schedule, event and
manual recording options dierently from the D-ViewCam installation path.