User manual

56D-Link D-ViewCam User Manual
Section 3 - Configuration
Motion Detection
To detect specic area motion detection, you have to dene at least one detection zone. Follow the steps below.
Step 1 - Click the New button and a small window will appear on the screen, you can drag the mouse to draw a detection
zone. You may dene more than one zone on the screen by repeating the same process.
Step 2 - Adjust the window to dene the detection zone.
Step 3 - Input a window name, then click the Save button.
Enable Motion Detection
Check the box to activate.
Window Name
Give the detection zone a
name.
Sensitivity
Modify the sensitivity setting by
changing the slider control. Move
toward right will increase the sensitivity
level, which means a relatively small
movement will trigger an action.
Move the slider control toward left will
reduce the sensitivity for movement
detection.
Percentage
Modify the percentage setting by
changing the slider control.
New
Create a new window.
Save
Save the settings.