User manual

55D-Link D-ViewCam User Manual
Section 3 - Configuration
Preset Point
Preset Location species where the IP camera should point. Preset Name species the position name of the pointer.
Follow the step below to set the Preset Point.
Step 1 - Use the PT Control interface to adjust the direction of the IP camera. Choose a number in the Preset Location
eld, and enter a name for this pointer in the Preset Name text box.
Step 2 - Click Saveandthenewly added presetname willshowupinthePresetLocationeld(youcanalso addother
presetpointsinthesameway).
Note: To remove a preset, select the Preset Location and click Remove.
Auto Scan Period
The IP camera will auto pan and auto
patrol within this time interval. You
may get service of Periodically Auto
Pan and Periodically Auto Patrol by
assigned interval, but this service
will stop the alarm service of that IP
camera, including Event Action of
Go Preset.