User manual

53D-Link D-ViewCam User Manual
Section 3 - Configuration
Information
Device setting can be configured in Expert Mode. If the device is disconnected, the device settings such as preset,
motion detection, and image quality will be disabled. The following section will explain the details of device setting.
Camera Information
Camera Name, ID and Password: You can
change this information.
Model name, MAC Address, and Status: The
system will load this information automatically,
and you can not modify this information.
Select Orientation
If the camera is installed upside down, use
the setting of Vertical Flipped to flip the
image upside down, or mirror the image to
ip it to the left, right or both.
Networking Information
IP Address, Device Port: You can change the camera IP address and
its port number. If this information changed through the camera web
server, please remember to update the information here as well.
Status: The system will load this information automatically, and you
can not modify the status manually.
Audio
Choose to Enable or Disable
the two way audio function.
Access to Device
By default, this option will connect and log
on to the camera directly.
Note: However, if you change the camera’s
user name or password, a login prompt
appears. Enter the user name and password
to login.
Device Setting
Note: If you change the device information, it would result in short-term interruption of schedule recording.