User manual

20D-Link D-ViewCam User Manual
Section 3 - Configuration
Start/Stop Manual Recording Button
Start/Stop Manual Recording Button
By clicking this button you can start or stop manual
recording of video.
When performing a manual recording, the video window will be marked red and the recording time information will be
displayed red in the lower right hand corner of the screen.
If you want to manually record multiple videos, follow these three steps below.
1. Select a group of live videos by pressing and holding the Ctrl key on the keyboard, and then click on all of the
camera images that you want recorded in the video display area.
2. To start recording, click the Start Manual Recording button.
3. To stop multiple recordings, select the cameras you wish to stop recording by repeating step 1, and then click
the Manual Record button to stop recording. All video data is recorded in the QVGA or CIF format. The frame
ratedependsonthecamerathatyouselectandshouldbeconguredviathecamera’swebinterface.