User`s guide

D-View 5.1 User’s Guide

♦ Module to which the object belongs

♦ Syntax

♦ Access limit

♦ Status

♦ Description, and so on.

The compiler can communicate with a remote device (bridge, switch, or router) to get

the current value or to set a new value for the MIB object of interest. This is achieved

by sending SNMP requests and receiving SNMP responses to get/set the value of the

object of the MIB, which resides in an SNMP enabled device.

Note:

Not every MIB needs to be implemented in an SNMP-enabled device.

The current values of the MIB objects of a specific device can be obtained in two ways:

“Info” or “Table View.” “Info” shows more detailed information for objects, both

definitions and values. “Table view” shows only the values of objects.

How to Use the MIB Complier

Step 1: Invoke the MIB Compiler.