User`s guide

D-View 5.1 User’s Guide
208
PIM
PIM MIB
This MIB module contains one scalar and eight tables.
The tables contained in this MIB are:
1. The PIM Interface Table contains one row for each of the router's PIM interfaces.
2. The PIM Neighbor Table contains one row for each of the router's PIM neighbors.
3. The PIM IP Multicast Route Table contains one row for each multicast routing
entry whose incoming interface is running PIM.
4. The PIM Next Hop Table contains one row for each outgoing interface list entry
in the multicast routing table whose interface is running PIM, and whose state
is pruned.
5. The (deprecated) PIM RP Table contains the PIM (version 1) information for IP
multicast groups which is common to all RPs of a group.
6. The PIM RP-Set Table contains the PIM (version 2) information for sets of
candidate Rendezvous Points (RPs) for IP multicast group addresses with
particular address prefixes.
7. The PIM Candidate-RP Table contains the IP multicast groups for which the
local router is to advertise itself as a Candidate-RP. If this table is empty, then
the local router advertises itself as a Candidate-RP for all groups.
8. The PIM Component Table contains one row for each of the PIM domains to
which the router is connected.
Table 42