TM D-Link AirPlus XTREME G+ DWL-G520+ High-speed 2.
Contents Package Contents .................................................................................3 Introduction............................................................................................4 Wireless Basics ....................................................................................6 Getting Started ....................................................................................10 Using the Configuration Utility ............................................................
Package Contents Contents of Package: TM D-Link AirPlus Xtreme G+ DWL-G520+ 2.4 GHz - 54Mbps Wireless PCI Adapter Manual, Warranty and Drivers on CD Printed Quick Installation Guide If any of the above items are missing, please contact your reseller. System Requirements for Configuration: A desktop computer with an available 32-bit PCI slot Windows XP, Windows 2000, Windows Me, or Windows 98SE At least 32 MB of memory and a 300 MHz processor An 802.11g or 802.
Introduction TM The D-Link AirPlus Xtreme G+ DWL-G520+ Wireless PCI Adapter is a 802.11g highperformance, wireless adapter that supports high-speed wireless networking at home, at work or in public places. Unlike most network cards, the DWL-G520+ provides data transfers at up to 8X (compared to the standard 11 Mbps) when used with other D-Link AirPlus Xtreme G+ products. The 802.11g standard is backwards compatible with 802.11b products.
Features Fully compatible with the 802.11g standard to provide a wireless data rate of up to 54Mbps Backwards compatible with the 802.
Wireless Basics D-Link wireless products are based on industry standards to provide easy-touse and compatible high-speed wireless connectivity within your home, business or public access wireless networks. D-Link wireless products will allow you access to the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking brings. A WLAN is a cellular computer network that transmits and receives data with radio signals instead of wires.
Wireless Basics (continued) People use WLAN technology for many different purposes: Mobility - Productivity increases when people have access to data in any location within the operating range of the WLAN. Management decisions based on real-time information can significantly improve worker efficiency. Low Implementation Costs – WLANs are easy to set up, manage, change and relocate. Networks that frequently change, both physically and logically, can benefit from WLANs ease of implementation.
Wireless Basics (continued) Standards-Based Technology The DWL-G520+ Wireless PCI Adapter utilizes the 802.11g standard. The IEEE 802.11g standard is an extension of the 802.11b standard. It increases the data rate up to 54 Mbps within the 2.4GHz band, utilizing OFDM technology. This means that in most environments, within the specified range of this device, you will be able to transfer large files quickly or even watch a movie in MPEG format over your network without noticeable delays.
Wireless Basics (continued) Installation Considerations The D-Link AirPlus Xtreme G+ DWL-G520+ lets you access your network, using a wireless connection, from virtually anywhere within its operating range. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
Getting Started There are basically two modes of networking: Infrastructure – using an Access Point, or Wireless Router, such as the DI-624+. Ad-Hoc – directly connecting to another computer, for peer-topeer communication, using wireless network adapters on each computer, such as two or more DWL-G520+ wireless network PCI adapters. On the following pages we will show you an example of an Infrastructure Network and an Ad-Hoc Network.
Getting Started Setting up a Wireless Infrastructure Network 1 2 3 4 DWL-G520+ with 5 Destop Computer Please remember that D-Link AirPlus Xtreme G+ wireless devices are preconfigured to connect together, right out of the box, with their default settings.
Getting Started Setting up a Wireless Ad Hoc Network Install the D-Link DWL-G520+ Wireless Network adapter into one desktop computer. See the Quick Installation Guide included with the product for installation instructions. Install another DWL-G650+ into a laptop computer. See the Quick Installation Guide included with the product. Set the wireless configuration for the adapters to Ad-Hoc mode, set the adapters to the same channel, and assign an IP Address to each computer on the Ad-Hoc network.
Using the Configuration Utility If you wish to change the default settings or optimize the performance of the DWL-G520+, D-Link has included a configuration utility for this purpose. However, in Windows XP, you will instead use zero configuration utility. Before you use the configuration utility for the DWL-G520+, you must install the drivers and the configuration utility from the CD-ROM that came with the DWLG520+. (Please see the Quick Installation Guide that came with the product.
Configuration Utility Link Info Status: Displays the MAC Address of the Access Point that is associated with the DWL-G520+. SSID: The Service Set Identifier is the name assigned to the wireless network. The factory SSID setting is set to default. TxRate: The default setting is Auto; TxRate settings are automatically determined by the DWL-G520+ depending on the distance from the access point at this default setting. Channel: Displays the channel information.
Configuration Utility D-Link AirPlus DWL-650+ 2.4GHz Wireless Cardbus Adapter Configuration This configuration screen displays the default settings for the DWL-G520+ To communicate on the network all devices must have the same settings for the following properties: SSID - (Service Set Identifier) is a name that identifies a wireless network. Access Points and wireless clients attempting to connect to a specific WLAN (Wireless Local Area Network) must use the same SSID. The default setting is default.
Configuration Utility Encryption Data Encryption – enable Encryption by clicking on the box. Encryption is disabled as the default setting. Authorization mode – choose one of the following modes: Open Authentication – communicates the key across the network Shared Authentication – allows communication only with other devices with identical WEP settings Auto – will automatically adjust to the Authentication mode of the wireless client Network Key – enter a key in either ASCII (e.g.
Configuration Utility Site Survey Available Networks The top section of the window displays the Available Networks. Scroll up and down the list and highlight the network to which you wish to connect. Click on the Connect button. Profiles In the lower half of the screen, you can manage the profiles that you have created for the wireless network at home, at the office and in public places. Scroll up and down and highlight the profile that you wish to configure.
Configuration Utility Add New Profile In this window you can configure all the properties of a profile in order to connect with a network of your choice. After you have entered your changes in this window, click OK to save the changes.
Configuration Utility About The ABOUT screen gives you information about the Firmware and Utility Versions of the DWL-G520+.
Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about networking computers using Windows 2000, ME or 98SE. Go to Start>Control Panel>Network Connections Select Set up a home or small office network When this screen appears, click Next.
Networking Basics Please follow all the instructions in this window: Click Next In the following window, select the best description of your computer. If your computer connects to the internet through a gateway/router, select the second option as shown.
Networking Basics Enter a Computer description and a Computer name (optional.) Click Next Enter a Workgroup name. All computers on your network should have the same Workgroup name.
Networking Basics Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer. This may take a few minutes.
Networking Basics In the window below, select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next. Insert a disk into the Floppy Disk Drive, in this case drive A.
Networking Basics Please read the information under Here’s how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. To continue click Next.
Networking Basics Please read the information on this screen, then click Finish to complete the Network Setup Wizard. The new settings will take effect when you restart the computer. Click Yes to restart the computer. You have completed configuring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your new wireless network will be ready to use.
Networking Basics Naming your Computer To name your computer, please follow these directions:In Windows XP: Click Start (in the lower left corner of the screen) Right-click on My Computer Select Properties and click Select the Computer Name Tab in the System Properties window. You may enter a Computer Description if you wish; this field is optional. To rename the computer and join a domain, Click Change.
Networking Basics Naming your Computer In this window, enter the Computer name Select Workgroup and enter the name of the Workgroup All computers on your network must have the same Workgroup name. Click OK Checking the IP Address in Windows XP The wireless adapter-equipped computers in your network must be in the same IP Address range (see Getting Started in this manual for a definition of IP Address Range.
Networking Basics Checking the IP Address in Windows XP This window will appear. Click the Support tab Click Close Assigning a Static IP Address in Windows XP/2000 Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable Gateway/Router you will not need to assign Static IP Addresses.
Networking Basics Assigning a Static IP Address in Windows XP/2000 Double-click on Network Connections Right-click on Local Area Connections Double-click on Properties 30
Networking Basics Assigning a Static IP Address in Windows XP/2000 D-Link AirPlus XtremeG+ DWL-G520+ Wireless PCI Adapter Click on Internet Protocol (TCP/IP) Click Properties In the window below, select Use the following IP address. Input your IP address and subnet mask. (The IP Addresses on your network must be within the same range. For example, if one computer has an IP Address of 192.168.0.2, the other computers should have IP Addresses that are sequential, like 192.168.0.3 and 192.168.0.4.
Networking Basics Checking the Wireless Connection by Pinging in Windows XP and 2000 Go to Start > Run > type cmd. A window similar to this one will appear. Type ping xxx.xxx.xxx. xxx, where xxx is the IP Address of the Wireless Router or Access Point. A good wireless connection will show four replies from the Wireless Router or access point, as shown. Checking the Wireless Connection by Pinging in Windows ME and 98SE Go to Start > Run > type command. A window similar to this will appear.
Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DWL-G520+. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples.) 1. Check that the drivers for the DWL-G520+ are installed properly.
Troubleshooting Double-click on Network Adapters Right-click on D-Link DWL-G520+ Wireless PCI Adapter D-Link AirPro DWL-AB650 Wireless Cardbus Adapter Select Properties to check that the drivers are installed properly D-Link AirPlus XtremeG DWL-G520+ Look under Device Status to check that the device is working properly TM D-Link AirPlus XtremeG DWL-G520+ High-Speed 2.
Troubleshooting 2. I cannot connect to the access point or the wireless router. Make sure that the SSID on the DWL-G520+ PCI adapter is exactly the same as the SSID on the Access Point or wireless router. Move the DWL-G520+ and Access Point or Wireless router into the same room and then test the wireless connection. Disable all security settings. (WEP, MAC Address Control, AES) Turn off your Access Point and the computer with the DWL-G520+.
Troubleshooting A. Under Tools> select Folder Options…> select View > under Hidden files and folders > select Show hidden files and folders B. Uncheck Hide extension for known file types > click on Apply C. Search for previously loaded driver files. Remove these files from the INF and SYSTEM32 (DRIVERS) folders in the Windows directory. Note: Windows XP and Windows 2000 will rename .inf files that have not received WHQL certification into oem.inf files (e.g., oem1.inf.) 6.
Troubleshooting Check that the Network Connection for the wireless client is configured properly. Select AP (Infrastructure) when connecting to an access point and select Ad-Hoc mode when connecting without an access point. Double-click on the WLAN icon in the taskbar > click on Configuration to change the settings for the wireless adapter. If Security is enabled, make sure that the correct encryption keys are entered on both the DWL-G520+ and the access point.
Technical Specifications Standards IEEE 802.11g IEEE 802.11 IEEE 802.11b Diagnostic LED Power Network Temperature Operating: 0ºC to 55ºC (32ºF to 131ºF) Humidity: 95% maximum, non-condensing Internal Antenna Type: Diversity Bus Type: 32-bit PCI Security: 802.1x* WPA* - Wi-Fi Protected Access (64-,128-WEP with TKIP, MIC, IV Expansion, Shared Key Authentication) Physical Dimensions: L = 5.24 inches (133mm) W = 4.76 inches (121mm) H = 0.
Technical Specifications Data Rates: With Automatic Fallback 54Mbps; 48Mbps; 36Mbps; 24Mbps; 18Mbps; 12Mbps; 11Mbps; 9Mbps; 6Mbps; 5.5Mbps; 2Mbps; 1Mbps Media Access Control: CSMA/CA with ACK Frequency Range: 2.4GHz to 2.462GHz Range: Indoors: Up to 328 feet (100 meters) Outdoors: Up to 1,312 feet (400 meters) Power Consumption: PowerSave mode = 28mA Standby mode = 4.
Contacting Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone. Tech Support for customers within the United States: D-Link Technical Support over the Telephone: (877) 453-5465 24 hours a day, seven days a week.
Warranty and Registration Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from: D-Link or its authorized reseller or distributor and Products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, addresses with an APO or FPO.
The original product owner must obtain a Return Material Authorization (“RMA”) number from the Authorized D-Link Service Office and, if requested, provide written proof of purchase of the product (such as a copy of the dated purchase invoice for the product) before the warranty service is provided.
Governing Law: This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited warranty provides specific legal rights and the product owner may also have other rights which vary from state to state. Trademarks: D-Link is a registered trademark of D-Link Systems, Inc.
