User`s manual

• Click Apply.
Example date and time setting
Changing web-based manager options
You can change the web-based manager idle timeout, firewall user authentication timeout and character set
used by the web-based manager.
• Go to System > Config > Options .
• Set the web-based manager idle time-out.
Set the idle time-out to control the amount of inactive time that the web-based manager waits before
requiring the administrator to log in again.
The default idle time-out is 5 minutes. The maximum idle time-out is 480 minutes (8 hours).
• Set the firewall outgoing policy user authentication time-out.
For more information, see Users and authentication
. The default Auth time-out is 15 minutes. The
maximum Auth time-out is 480 minutes (8 hours).
• Click Apply.
The options that you have selected take affect.
Adding and editing administrator accounts
When the DFL-500 is initially installed, it is configured with a single administrator account with the user name
admin. From this administrator account you can add and edit administrator accounts. You can also control the
access level of each of these administrative accounts and, optionally, control the IP address from which the
administrator can connect to the DFL-500.
There are three administration account access levels:
admin
Has all permissions. Can view, add, edit, and delete administrator accounts. Can view and change the DFL-
500 configuration. There is only one admin user.
Read &
Write
Can view and change the DFL-500 configuration. Cannot view, add, edit, or delete administrator accounts.
Can edit their own administrator accounts.
Read Only
Can view the DFL-500 configuration.
This section contains the following procedures:
DFL-500 User’s Manual
98