User`s manual

You can restore your system settings by uploading a previously downloaded system settings text file to the

DFL-500.

Default NAT mode system configuration

When the DFL-500 is first powered up or when it is reset to default, the system has the following standard

configuration:

• Operation Mode: Network Address Translation

• Internal Address: 192.168.1.99, mask 255.255.255.0

• External Address: 192.168.100.99, mask 255.255.255.0

• Management Address: 10.10.10.1, mask 255.255.255.0

• Administrator Name: admin, Password: blank

• Idle time out: 5 minutes

• Auth time out: 15 minutes

• Internal administration: HTTPS enabled, PING enabled, SSH disabled

• External administration: HTTPS disabled, PING enabled, SSH disabled

• DHCP server: disabled

• SNMP: disabled

• All outgoing traffic: allowed

• All incoming traffic: blocked

• Internal Address: Internal_All

• External Address: External_All

• One-time schedule: none

• Recurring schedule: Always

• Anti-virus for HTTP: Low

• Anti-virus for POP3, SMTP, and IMAP: Low

• Worm protection: Disabled

Default Transparent mode system configuration

When the DFL-500 is first switched to transparent mode or when it is reset to default and run in Transparent

mode, the system has the following standard configuration:

• Administrator Name: admin, Password: blank

• Idle Time-out: 5 minutes

• Management Address: 192.168.1.99, mask 255.255.255.0

• Management administration: HTTPS enabled, PING enabled, SSH enabled