User`s manual

Administering the DFL-500
This chapter describes how to use the DFL-500 web-based manager to administer and maintain the DFL-500.
It contains the following sections:
• Logging into the web-based manager
• System status
• Network configuration
• System configuration
Logging into the web-based manager
To connect to the DFL-500 using the web-based manager you require:
• A computer with an ethernet connection
• Internet Explorer version 4.0 or higher
• A crossover cable or an ethernet hub and two ethernet cables
To connect to the web-based manager:
• Make sure the computer from which you are going to connect to the web-based manager is correctly
configured on the same network as the DFL-500 interface to which you are going to connect.
o If the DFL-500 is running in NAT mode, connect to the internal interface
o If the DFL-500 is running in Transparent Mode, connect to the management interface
• Start Internet Explorer and browse to the address https://address . Where address is the IP address of
the internal or management interface to which you are connecting.
The DFL-500 login page appears.
DFL-500 login page
• Type an administrator name and password and click Login.
DFL-500 User’s Manual
88