User`s manual

• Click on TCP/IP Settings.

• Turn off Use IP header compression.

• Turn off Use default gateway on remote network.

• Click OK twice.

Connecting to the PPTP VPN

• Start the dial-up connection that you configured in the previous procedure.

• Enter your PPTP VPN User Name and Password.

• Click Connect.

Configuring a Windows 2000 Client for PPTP

Use the following procedure to configure a client machine running Windows 2000 so that it can connect to a

DFL-500 PPTP VPN.

Configuring a PPTP dial-up connection

• Go to Start > Settings > Network and Dial-up Connections .

• Double click Make New Connection to start the Network Connection Wizard. Click Next.

• For Network Connection Type, select Connect to a private network through the Internet and click Next.

• For Destination Address, enter the external address of the DFL-500 to connect to and click Next.

• Set Connection Availability to Only for myself and click Next.

• Click Finish.

• Click Properties in the Connect window.

• Click the Security tab.

• Uncheck Require data encryption.

• Click OK.

Connecting to the PPTP VPN

• Start the dial-up connection that you configured in the previous procedure.

• Enter your PPTP VPN User Name and Password.

• Click Connect.

• In the connect window, enter the User Name and Password you use to connect to your dial-up network

connection.

This user name and password is not the same as your VPN user name and password.

Configuring a Windows XP Client to connect to a DFL-500 PPTP VPN

Use the following procedure to configure a client machine running Windows XP so that it can connect to a

DFL-500 PPTP VPN.

Configuring a PPTP dial-up connection

• Go to Start > Control Panel .

• Click Network and Internet Connections.

• Select Create a Connection to the network of your workplace and click Next.

• Click Virtual Private Network Connection and click Next.

DFL-500 User’s Manual