User`s manual

• Click Apply to save your changes.
Traffic shaping
You can use traffic shaping to guarantee the amount of bandwidth available through the firewall for a policy.
Guarantee bandwidth to make sure that there is enough bandwidth available for a hi-priority service.
You can also use traffic shaping to limit the amount of bandwidth available through the firewall for a policy.
Limit bandwidth to keep less important services from using bandwidth needed for more important services.
Adding traffic shaping to a policy
You can add traffic shaping to any type of policy. The following procedure describes adding traffic shaping to
an Int to Ext policy.
• Go to Firewall > Policy > Int to Ext .
• Choose a policy to add traffic shaping to and click Edit
.
• Turn on traffic shaping.
• Configure traffic shaping for the policy:
Guaranteed bandwidth
Available in a future release.
Maximum bandwidth
Available in a future release.
Traffic Priority
Select high, medium, or low.
• Click OK to save your changes to the policy.
DFL-500 User’s Manual
41