Systems Network Card User Manual

D-Link DFE-550TX Adapter

system.

Product Features

Designed for high performance and versatility, the DFE-550TX

Adapter provides the following features:

• Plug and Play installation.

• Complies with the IEEE 802.3 10Base-T and 802.3u 100Base-TX Ethernet

standards.

• RJ-45 connector for standard network cable connection.

• 100Mbps Fast Ethernet or 10Mbps Ethernet data transfer rates, automatically

configured by NWay auto-negotiation.

• Full duplex or half-duplex operation, also NWay configured.

• PCI Bus Master direct memory access for high throughput and low CPU

utilization.

• ACPI 1.0 power management compliant.

• Wake-On-LAN power-saving feature allows sleeping PCs to be woken up and

used via remote stations.

• IEEE 802.3x Flow Control enabled with full duplex operation, allowing

enhanced operation when directly connected to a switch.

• IEEE 802.1Q/VLAN Tagging supported

• VLAN registration using IEEE802.1Q GVRP standard

• IEEE 802.1p Tagging supported

• IP Multicast packet filtering reduces CPU utilization and conserves network

bandwidth.

• Sixteen packet counters provide a full range of network management statistics.

• DL10050C D-Link’s own 32-bit intelligent Ethernet controller.

• Large 2Kb Tx, 2Kb Rx FIFO buffers synchronize transmissions and buffer data

to help prevent packet loss.

• Three LED indicators: Link/Act, Speed (10/100), Full/Half Duplex.

• Drivers for all leading Network Operating Systems.