HD Wi-Fi Camera DCS-936L QUICK INSTALLATION GUIDE КРАТКОЕ РУКОВОДСТВО ПО УСТАНОВКЕ GUÍA DE INSTALACIÓN RÁPIDA GUIA DE INSTALAÇÃO RÁPIDA 快速安裝指南 PETUNJUK PEMASANGAN CEPAT
ENGLISH CONTENTS OF PACKAGING HD Wi-Fi Camera DCS-936L POWER ADAPTER MOUNTING KIT QUICK INSTALL CARD If any of these items are missing from your packaging, contact your reseller.
ENGLISH SYSTEM REQUIREMENTS • 802.11n/g router (a D-Link Cloud Router is recommended) • A broadband Internet connection • iPhone, iPad, Android, or Windows smartphone or tablet (please refer to the mobile app's store page to check whether your device is compatible) PRODUCT SETUP SETTING UP YOUR CAMERA WITH MYDLINK LITE Please follow the instructions below to set up your mydlink camera.
ZERO CONFIGURATION SETUP If you have a D-Link Cloud Router, you can take advantage of Zero Configuration Setup. This feature configures your camera’s settings for you and adds it to your mydlink account automatically. ENGLISH PRODUCT SETUP Step 1: Press the WPS button on the camera. The PWR LED will start blinking. Step 2: Press the WPS button on your Cloud Router within 120 seconds. The DCS-936L will automatically create a wireless connection to your router and automatically reboot.
ENGLISH MOUNTING THE CAMERA Please refer to the steps below to assist you with mounting the camera. It is recommended that you configure the camera before mounting. 1 2 3 4 5 6 4 Step 1: Place your thumb behind the camera hinge as shown, then press down on a base release nub and pull to detach the camera from the camera base. Step 2: Place the camera base where you want to position the camera and use a pencil to mark the holes.
SETUP AND CONFIGURATION PROBLEMS 1. WHY IS THE CAMERA VIEW HAZY OR BRIGHT WHEN USING NIGHT VISION MODE? The IR night vision lights on the camera may be reflecting off of a nearby surface or window. Try repositioning your camera to avoid reflections or glare. ENGLISH TROUBLESHOOTING 2. WHAT CAN I DO IF I FORGET MY CAMERA PASSWORD? If you forget your camera password, you will need to perform a hard reset of your camera. This process will change all your settings back to the factory defaults.
FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
(1) 「經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率 或變更原設計之特性及功能」。 (2) 「低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改 善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機 須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾」。
