Version 1.
Manual Overview D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change. Please refer to the www.mydlink.com website for the most current information. Manual Revisions Revision Date 1.0 November 04, 2010 Description DCS-932L Revision A1 with firmware version 1.
Table of Contents Table of Contents Manual Overview............................................................... 2 Manual Revisions........................................................................... 2 Trademarks...................................................................................... 2 Product Overview............................................................... 5 Package Contents.......................................................................... 5 System Requirements.......
Table of Contents Active User......................................................................41 Wireless Security..............................................................42 What is WEP?.................................................................................42 What is WPA?.................................................................................43 Configuring the DCS-932L with a Router....................44 Troubleshooting...........................................................
Section 1 - Product Overview Product PackageOverview Contents • • • • • • DCS-932L Wireless N IR Home Network Camera CAT5 Ethernet Cable Power Adapter Manual and Software on CD Quick Install Guide Mounting Kit Note: Using a power supply with a different voltage than the one included with your product will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller.
Section 1 - Product Overview Introduction Congratulations on your purchase of the DCS-932L Wireless N IR Home Network Camera. The DCS-932L is a versatile and unique solution for your small office or home. Unlike a standard webcam, the DCS-932L is a complete system with a built-in CPU and web server that transmits high quality video images for security and surveillance.
Section 1 - Product Overview Features Simple to Use The DCS-932L is a stand-alone system with a built-in CPU, requiring no special hardware or software such as PC frame grabber cards. The DCS-932L supports both ActiveX mode for Internet Explorer and Java mode for other browsers such as Firefox® and Safari®. Supports a Variety of Platforms Supporting TCP/IP networking, HTTP, and other Internet related protocols.
Section 1 - Product Overview Hardware Overview Front View IR LED Camera Lens Microphone Power and Link LED D-Link DCS-932L User Manual 8
Section 1 - Product Overview Rear View Power Receptor Ethernet Port Reset WPS LED WPS Button Camera Stand D-Link DCS-932L User Manual 9
Section 2 - Installation Installation Hardware Installation Connect the Ethernet Cable Connect the included Ethernet cable to the network cable connector located on the bottom panel of the DCS-932L and attach it to the network. Attach the External Power Supply Attach the external power supply to the DC Power receptor located on the rear back panel of the DCS-932L and connect it to your wall outlet or power strip.
Section 2 - Installation Wireless Installation Considerations The D-Link Wireless Network Camera lets you access your network using a wireless connection from anywhere within the operating range of your wireless network. However, the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
Section 2 - Installation Camera Installation Wizard Insert the Installation CD-ROM into your computer’s optical drive to start the autorun program. The CD-ROM will open the Camera Installation Wizard. Simply click Start to go through the Installation Wizard, which will guide you through the installation process from connecting your hardware to configuring your camera.
Section 2 - Installation WPS - Push Button Setup Alternatively, you may create a WPS connect using the WPS Button on the back of the camera. To create a WPS connection: Step 1 Press and hold the WPS button for three seconds. The blue WPS status LED above the button will blink. Step 2 Press the WPS button on your router within 60 seconds. The WPS button is usually on the front or side of your router.
Section 3 - mydlink Portal mydlink Portal After registering your DCS-932L camera with a mydlink account in the Camera Installation Wizard. You will be able to remotely access your camera from the www.mydlink.com website.
Section 3 - mydlink Portal Camera Status Here, you can see the online status of each of your cameras. Your online status may be one of the following: A green checkmark indicates that your camera is online and ready to use. A yellow exclamation point indicates that your camera is online, but the camera password has changed. You will need to enter your new camera password to access your camera again. A red x indicates that your camera is offline and currently cannot be accessed remotely.
