User's Manual

18D-Link DCS-8526LH User Manual

Section 3 - mydlink

1 Device Photo Tap to add a customized photo of this device.

2 Device Name Tap to change the device’s name.

3 Device Location Tap to change or add a new location for this device.

4 Time Zone Select the time zone to calibrate your device to.

5 Wi-Fi

Tap to change the wireless network this device will use to connect to the

Internet.

Note: The network must be the same as all your other mydlink

devices that you wish to use the same account for.

6 Designated Contact

Tap here to add, remove, or edit designated contacts that appear in the

rich notication.

7 Camera Microphone

Tap to enable or disable picking up sound near your camera in live view

and recordings.

8 Motion Settings

Tap to further congure sensitivity and the active area of motion

detection.

Point to Go

This photo is what you will see when you control your viewpoint in the

camera's Point to Go live-view. Tap Rescan to scan a new panorama.

Auto Home

Enable to automatically return your camera to the set 'Home Point'

after 60 seconds of inactivity.

11 Night Vision Tap to change night vision detection to On, O or Auto.

12 Anti-Flicker

Reduces icker in the video. Tap 50 Hz or 60 Hz depending on the frequency

of your lights.

13 Pan-Tilt Control

Choose whether to control your camera's Point to Go live-view pan-tilt

control by swiping or tapping.

14 Privacy Mode Tap to enable. Privacy mode will disable the camera feed.

15 Invert Image Enable this to invert the camera view.

16 Reverse Swipe Direction Tap to reverse the swipe direction.