User's Manual

12D-Link DCS-8515LH User Manual
Section 2: Installation
Step 3:
After logging in, tap the Menu icon in the top-left corner, select Add New
Device and follow the on-screen instructions to connect to your camera.
Bluetooth needs to be enabled on your phone.
Step 4:
When you are asked to scan a QR code, select Yes or No.
If you selected Yes:
Scan the QR code on the bottom of the the camera, then press Next.
If you selected No:
Select the DCS-8515LH camera from the list, then press Next.
Select Next and continue to follow the onscreen instructions.
Final Step:
Congratulations, your HD Pan & Tilt Wi-Fi Camera is now ready to use!
Be sure to check the www.mydlink.com website periodically for the latest
rmware updates to keep your product secure and up to date with the latest
features.
Note: If you experience issues registering this camera with your mydlink account, or if you
purchased an open box or resold unit, perform a hard reset by pressing and holding the
recessed reset button on the camera for 10 seconds while the device is powered on, making
sure that you see the LEDs turn o.