User Manual

Appendix1:



Step1:

Onceyourcameraissetup,openthemydlinkappandsigninusingyourmydlinkaccount.



Note:Ifyouareawayfromyourhomenetwork,youmusttapRemotebeforeloggingin.

Ifyouareathome,tapLocalbeforeloggingin.



Step2:

TapAddanewCameratofirstlysetupyourcamera.



PAGE 1
Appendix 1: Step 1: Once your camera is set up, open the mydlink app and sign in using your mydlink account. Note: If you are away from your home network, you must tap Remote before logging in. If you are at home, tap Local before logging in. Step 2: Tap Add a new Camera to firstly setup your camera.
PAGE 2
Step 3: If you have the QR code that is printed on device label, tap Yes and then scan the QR code. Step 4: Make sure you device is ready to setup. And turn on your Bluetooth module on your mobile device.
PAGE 3
Step 5: Selet the available router that your want to connect, and enter the WiFi password. Step 6: Change camera’s password to protect your dvice.
PAGE 4
Step 7: Select the mydlink service option if you want to register your camera with mydlink service. Step 8: After the setup procedure, app will scan for your DCS‐8100LH. Once it is done scanning, tap the camera and you will be taken to its live view screen where you can monitor and control the camera functions in real time.