User's Manual

51D-Link DCS-7000L User Manual
Section 4: Conguration
Add Recording
Recording entry
name:
Enable this
recording:
Priority:
Source:
Recording
schedule:
Recording
settings:
Destination:
Total cycling
recording size:
Size of each le
for recording:
Time of each le
for recording:
File Name Prex:
The unique name of the entry.
Select this to enable the recording function.
Set the priority for this entry. The entry with a higher priority
value will be executed rst.
The source of the stream.
Scheduling the recording entry.
Conguring the setting for the recording.
Select the folder where the recording le will be stored.
Input a value between 200 MB and 2000000 MB (2 TB) for the
space allocated to recording. New recordings will replace the
oldest recording when the total recording size exceeds this value.
If this is selected, les will be separated based on the le size you
specify.
If this is selected, les will be separated based on the maximum
length you specify.
The prex name will be added on the le name of the recording
le(s).
Here you can congure and schedule the recording settings. After making any
changes, click the Save Settings button to save your changes.