User's Manual

45D-Link DCS-7000L User Manual
Section 4: Conguration
Event Setup
In a typical application, when motion is detected, the DCS-7000L sends images to a FTP server or via e-mail as notications. As shown in the
illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is
triggered, a specied action will be performed. You can congure the DCS-7000L to send snapshots or videos to your e-mail address or FTP site.
ex.
Motion detection,
Periodically, Digital input,
System reboot
Event Condition
ex.
Snapshot, Video Clips
ex.
Email, FTP
Media
(what to send)
Server
(where to send)
Action
To start plotting an event, it is suggested to congure server and media columns rst so that the DCS-7000L will know what action shall be
performed when a trigger is activated.