User's Manual
10D-Link DCS-6010L User Manual
Section 2: Installation
If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Conguration. Zero Conguration automatically
congures your camera's settings for you, and adds it to your mydlink account automatically. This type of setup allows you to
set up your camera by simply plugging it in and connecting it to your router.
Connect your camera to your mydlink-enabled Cloud Router and Zero Conguration will automatically congure your DCS-6010L
and automatically add the camera to your mydlink account. After the short time it takes to do this you can remotely access
your camera from the www.mydlink.com website to manage and monitor your DCS-6010L.
Connect the Ethernet Cable
Using the provided Ethernet cable connect one end to your camera and the
other-end to your network.
To install the provided Ethernet cable see "Internal Ports" on page 8 for detailed
instructions.
Attach the External Power Supply
Attach the external power supply to the power receptor and to your wall outlet
or power strip.
To install the provided power supply see "Internal Ports" on page 8 for detailed
instructions.
Zero Conguration Setup
1
1 Ethernet Cable
Use an RJ45 Ethernet cable or PoE cable to connect to your network
2 Power Cable Power cable for the provided power adapter
2