User's Manual

46D-Link DCS-2332L User Manual
Section 3: Conguration
Event Setup
In a typical application, when motion is detected, the DCS-2332L sends images to a FTP server or via e-mail as notications. As shown in the
illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is
triggered, a specied action will be performed. You can congure the Network Camera to send snapshots or videos to your e-mail address or FTP
site.
H[
0RWLRQGHWHFWLRQ
3HULRGLFDOO\'LJLWDOLQSXW
6\VWHPUHERRW
(YHQW&RQGLWLRQ
H[
6QDSVKRW9LGHR&OLSV
H[
(PDLO)73
0HGLD
ZKDWWRVHQG
6HUYHU
ZKHUHWRVHQG
$FWLRQ
To start plotting an event, it is suggested to congure server and media columns rst so that the Network Camera will know what action shall be
performed when a trigger is activated.