User's Manual

62D-Link DCS-2230L User Manual
Section 4: Conguration
System
In this section, you may backup, restore and reset the camera conguration, or reboot the camera.
Save To Local Hard Drive:
Load From Local Hard Drive:
Restore to Factory Default:
Reboot Device:
Enable Schedule Reboot:
You may save your current camera conguration as a le
on your computer.
Locate a pre-saved conguration by clicking Browse and
then restore the pre-dened settings to your camera by
clicking Load Conguration.
You may reset your camera and restore the factory
settings by clicking Restore Factory Defaults.
This will restart your camera.
Check to enable this feature and select the days and
times your DCS-2230L will automatically reboot. Click
Save for it to take eect.