User's Manual

49D-Link DCS-2210/2230 User Manual
Conguration
ICR and IR
Here you can congure the ICR and IR settings. An IR(Infrared) Cut-Removable(ICR) lter can be disengaged for increased sensitivity
in low light environments.
Automatic:
Day Mode:
Night Mode:
Schedule Mode:
IR Light Control:
Off:
On:
Sync:
Schedule:
The Day/Night mode is set automatically.
Generally, the camera uses Day mode and
switches to Night mode when needed.
Day mode enables the IR Cut Filter.
Night mode disables the IR Cut Filter.
Set up the Day/Night mode using a schedule.
The camera will enter Day mode at the starting
time and return to Night mode at the ending
time.
The camera can enable or disable the IR
(infrared) light according to your preferences.
This setting provides additional controls
depending on your specic application.
The IR light will always be off.
The IR light will always be on.
The IR light will turn on when the ICR sensor is on.
The IR light will turn on or off according to the schedule that you specify below.