User's Manual

30D-Link DCS-2210/2230 User Manual
Conguration
Image Setup
In this section, you may congure the video image settings for your camera. A preview of the image will be shown in Live Video.
Enable Privacy
Mask:
Anti Flicker:
Mirror:
Flip:
Power Line:
White Balance:
Exposure
Mode:
Denoise:
Brightness:
The Privacy Mask setting allows you to specify upto 3 rectangular areas
on the camera's image to beblocked/excluded from recordings and
snapshots.
You may click and drag the mouse cursor over thecamera image to draw
a mask area.Right clicking on the camera image brings up thefollowing
menu options:
Disable All: Disables all mask areas
Enable All: Enables all mask areas
Reset All: Clears all mask areas.
If the video ickers, try enabling this setting.
This will mirror the image horizontally.
This will ip the image vertically. When turning Flip on, you may want to
consider turning Mirror on as well.
Select the frequency used by your power lines to avoid interference or
distortion.
Use the dropdown box to change white balance settings to help balance colors for different environments. You can choose
from Auto, Outdoor, Indoor, Fluorescent, and Push Hold.
Changes the exposure mode. Use the dropdown box to set the camera for Indoor, Outdoor, or Night environments, or to
Moving to capture moving objects. The Low_Noise option will focus on creating a high-quality picture without noise. You can
also create 3 different custom exposure modes. The Max Gain setting will allow you to control the maximum amount of gain
to apply to brighten the picture.
This setting controls the amount of noise reduction that will be applied to the picture.
Adjust this setting to compensate for backlit subjects.