User's Manual

27D-Link DCS-2210/2230 User Manual
Conguration
Wireless Setup(DCS-2230 only)
This section allows you to set up and congure the wireless settings on your camera. After making any changes, click the Save
Settings button to save your changes.
Site Survey:
SSID:
Wireless Mode:
Channel:
Authentication:
Encryption:
Click the Rescan button to scan for available wireless
networks. After scanning, you can use the dropdown
box to select an available wireless network. The
related information (SSID, Wireless Mode, Channel,
Authentication, Encryption) will be automatically
lled in for you.
Enter the SSID of the wireless access point you
wish to use.
Use the dropdown box to select the mode of the
wireless network you wish to connect to.
Infrastructure is normally used to connect to an
access point or router. Ad-Hoc is usually used to
connect directly to another computer.
If you are using Ad Hoc mode, select the channel
of the wireless network you wish to connect to, or
select Auto.
Select the authentication you use on your wireless
network - Open, Shared, WPA-PSK, or WPA2-PSK.
If you use WPA-PSK or WPA2-PSK authentication,
you will need to specify whether your wireless
network uses TKIP or AES encryption. If you use
Open or Shared authentication, WEP encryption
should be setting.