User's Manual

66D-Link COVR-X1860 || COVR-X1862 || COVR-X1863 || COVR-X1864 User Manual
Section 3 - Conguration
Advanced Settings - LED Control
Status LED: Choose to enable or disable the COVR status indicator LED
on the
front panel of both Covr Point A and the other Covr
Point(s). When disabled, the LED will no longer light up solid
white during normal operation and will instead turn o.
The LED will still light up in the corresponding color and mode in
any of the following circumstances:
-Firmware upgrade
-Device reboot
-Establishing a WPS connection
-Weak uplink signal
-No uplink signal
Once any of the above situations has ended, the LED will briey light
up solid white and then turn o again.
Click Save when you are done.
Admin (Continued)