Instructions

Configuration using APP.
COVR-1100 is a wireless mesh router that can be paired with more devices (up to 4) to creates a whole
home wi-fi system. You should be using D-Link wi-fi app for the configuration of this device.
There are two modes supported by this device. Router mode and Bridge mode. If you connect it directly
with the ISP line, then you need to configure as Router mode and if there is a existing router then you
can configure it as bridge mode.
On the backside of the device there are two ports. Ethernet port and Internet port. To configure in
router mode, connect the ISP cable to the router in Internet port. Connect the mobile phone to the
wireless network of the covr-1100 and launch the D-Link wi-fi app.
Click on Set up New Network.

Summary of content (13 pages)