Quick Installation Guide 5km Long Range 802.
Contents English 1
Hardware Overview This installation guide provides basic instructions for installing the DAP-3711 on your network. For additional information about how to use the access point, please see the User Manual from the D-Link support website. LED Indicators Package Contents 1 2 3 ENGLISH Before You Begin 4 This DAP-3711 should include the following items: • • • • • 5km Long Range 802.
Interface Connectors Cable Requirements ENGLISH Use a CAT 5 cable with an even sheath. The Ethernet ports on the DAP-3711 access point cannot accept a CAT 5 cable that has an uneven sheath; the RJ-45 connector on the cable will not fit properly into the receptacle on the access point. 1 2 3 Figure 2: DAP-3711 Interface # 1 Feature Reset Button 2 LAN Port 3 PoE Port Description Resets the device to its factory settings.
Connecting Through a Switch or Router: 1. 3. Mounting on a Pole 1. 2. Connect an Ethernet cable to the LAN port on the DAP-3711. Place the DAP-3711 against the pole where you want it to be positioned. Username: admin Password: admin Switch or router DAP-3711 Figure 5: Mounting the Device Computer Figure 4: Indirect Connection Mounting the Device 3. Wrap the metal mounting ties around the pole and thread them through the holes on the DAP-3711.
ENGLISH RF Frequency Requirements This device is for outdoor use only. High power radars are allocated as primary users of the 5150 ~ 5250 MHz, 5725 ~ 5850 MHz bands. These radar stations can cause interference with and/ or damage PoE Adapter this device. This is fixed point-to-point device. TECHNICAL SUPPORT 4 dlink.
Appendix - Statements FCC Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Ver. 1.
