User Manual Part 2

55
DAP-3520 User’s Manual
D-Link AirPremier N Dual Band Exterior PoE Access Point
Using the Configuration Menu
Home > Advanced Settings > DHCP Server > Static Pool
Setting
Function Enable/
Disable:
Assigned IP:
Dynamic Host Conguration Protocol (DHCP) assigns IP addresses
to wireless devices on the network. This protocol simplies network
management and allows new wireless devices to receive IP
addresses automatically without the need to manually assign IP
addresses. Select Enable to allow the DAP-3520 to function as a
DHCP server.
Use the Static Pool Settings to assign the same IP address to a
device every time you start up. The IP addresses assigned in the
Static Pool list must NOT be in the same IP range as the Dynamic
Pool. After you have assigned a static IP address to a device via its
MAC address, click Apply; the device will appear in the Assigned
Static Pool at the bottom of the screen. You can edit or delete the
device in this list.
The DHCP address pool denes the range of IP addresses that can be assigned to stations on the
network. A static pool allows specic wireless stations to receive a xed IP without time control.