User Manual Part 2

53
DAP-3520 User’s Manual
D-Link AirPremier N Dual Band Exterior PoE Access Point
Using the Configuration Menu
Home > Advanced Settings > DHCP Server > Dynamic Pool
Settings
Function Enable/
Disable:
Dynamic Host Conguration Protocol (DHCP) assigns dynamic
IP addresses to devices on the network. This protocol simplies
network management and allows new wireless devices to receive
IP addresses automatically without the need to manually assign new
IP addresses. Select Enable to allow the DAP-3520 to function as
a DHCP server.
Enter the number of IP addresses available for assignment. IP
addresses are increments of the IP address specied in the “IP
Assigned From” eld.
The Range of Pool
(1-254):
Input the rst IP address available for assignment on your net-
work.
Subnet Mask:
All devices in the network must have the same subnet mask to
communicate. Enter the submask for the network here.
The DHCP address pool denes the range of the IP address that can be assigned to stations in
the network. A Dynamic Pool allows wireless stations to receive an available IP with lease time
control.
IP Assigned From: