User Manual Part 2

65
DAP-3520 User’s Manual
D-Link AirPremier N Dual Band Exterior PoE Access Point
Using the Configuration Menu
Source Interface:
Source IP:
ProtocoI:
Action:
Destination Interface:
Destination IP:
Port Range:
Toggle among Source, LAN, and WAN. This is the TCP/UDP port
on either the LAN or WAN side.
Enter a beginning and ending source IP address.
Select the transport protocol that will be used for the lter rule.
Select to Allow or Deny transport of the data packets according to
the criteria dened in the rule.
Toggle among Dest, LAN, and WAN. This is the TCP/UDP port on
either the LAN or WAN side.
Enter a beginning and ending destination IP address.
Enter the desired port range for the lter rule.