User Manual Part 1
Table Of Contents
- Package Contents
- Introduction
- Features and Benefits
- Wireless Basics
- Five Operational Modes
- Getting Started
- Using the Configuration Menu
- Home > Basic Settings > Wireless > Access Point mode
- Home > Basic Settings > Wireless > WDS with AP mode
- Home > Basic Settings > Wireless > WDS mode
- Home > Basic Settings > Wireless > Wireless Client mode
- Home > Basic Settings > Wireless > WISP Client Router mode
- Home > Basic Settings > Wireless > Open System or Shared Key authentication
- Home > Basic Settings > Wireless > WPA-Personal authentication
- Home > Basic Settings > Wireless > WPA-Enterprise authentication
- Home > Basic Settings > LAN
- Home > Basic Settings > Internet Connection > Static IP
- Home > Basic Settings > Internet Connection > Dynamic IP (DHCP)
- Home > Basic Settings > Internet Connection > PPPoE
- Home > Basic Settings > Internet Connection > PPTP
- Home > Advanced Settings > Performance
- Home > Advanced Settings > Multi-SSID
- Home > Advanced Settings > VLAN > VLAN List
- Home > Advanced Settings > VLAN > Port List
- Home > Advanced Settings > VLAN > Add/Edit VLAN
- Home > Advanced Settings > VLAN > PVID Setting
- Home > Advanced Settings > Intrusion
- Home > Advanced Settings > Schedule
44
DAP-3520 User’s Manual
D-Link AirPremier N Dual Band Exterior PoE Access Point
RADIUS Server:
When you select WPA-Enterprise, enter the IP address of the
primary RADIUS server. You must also congure RADIUS port and
RADIUS secret. In addition to a primary RADIUS server, the AP
allows you to set up an optional backup RADIUS server.
RADIUS Port:
Enter the RADIUS port.
RADIUS Secret:
Accounting Mode:
Accounting Server:
Enter the RADIUS secret.
Use the drop-down menu to Enable the accounting mode feature.
When you select WPA-Enterprise, enter the IP address of the
primary accounting server. You must also congure the accounting
port and the accounting secret. In addition, to a primary accounting
server, the AP allows you to setup an optional backup accounting
server.
Enter the accounting port.
Enter the accounting secret.
Using the Configuration Menu
Confirm PassPhrase:
When you select WPA-Personal, please re-enter the PassPhrase
entered in the previous item in the corresponding eld.
Accounting Port:
Accounting Secret:










