User Manual Part 1

38
DAP-3520 User’s Manual
D-Link AirPremier N Dual Band Exterior PoE Access Point
Using the Configuration Menu
Enter the IP address (Static IP only).
Enter the subnet mask (Static IP only).
Enter the gateway IP address provided by your ISP.
The DNS server information will be supplied by your ISP (Internet
Service Provider).
Enter the server IP provided by your ISP (optional).
Enter your PPTP account name.
Enter your PPTP password.
Retype your PPTP password.
You may need to change the Maximum Transmission Unit for optimal
performance with your specic ISP. The default MTU is 1400.
The default MAC address is set to the WAN’s physical interface MAC
address on the DAP-3520. You can tick this Clone MAC Address
Enable check box to copy the MAC address of the Ethernet Card
installed by your ISP and replace the WAN MAC address with the
MAC address of the DAP-3520. It is not recommended that you
change the default MAC address unless required by your ISP.
Use the drop-down menu to select Auto or Manual.
Manually enter an appropriate MAC address or click the Scan button
to search for a specic MAC address.
IP Address:
Subnet Mask:
Gateway:
DNS Address:
Server IP/Name:
PPTP Acount:
PPTP Password:
PPTP Retype Password:
MTU:
Enable:
MAC Source:
MAC Address: