User Manual Part 1

Table Of Contents

DAP-3520 User’s Manual

D-Link AirPremier N Dual Band Exterior PoE Access Point

Home > Basic Settings > Internet Connection > PPPoE

Using the Conﬁguration Menu

Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection.

Your ISP will provide you with a username and password. This option is typically used for DSL

services. Make sure to remove your PPPoE software from your computer. The software is no

longer needed and will not work through a router.

Use the drop-down menu to choose PPPoE. The other three choices

are Static IP, Dynamic IP (DHCP), and PPTP.

Select Dynamic PPPoE (most common) or Static PPPoE. Use

Static PPPoE if your ISP assigned you the IP address, subnet mask,

gateway, and DNS server addresses.

Internet

Connection Type:

PPPoE Mode: