User Manual Part 1

Table Of Contents

DAP-3520 User’s Manual

D-Link AirPremier N Dual Band Exterior PoE Access Point

Static IP (Manual) is chosen here. Choose this option if you do not

have a DHCP server in your network, or if you wish to assign a static

IP address to the DAP-3520. When Dynamic IP (DHCP) is selected,

the other elds here will be grayed out. Please allow about 2 minutes

for the DHCP client to be functional once this selection is made.

The default IP address is 192.168.0.50. Assign a static IP address

that is within the IP address range of your network.

Enter the subnet mask. All devices in the network must share the

same subnet mask.

Enter the IP address of the gateway in your network. If there is a

gateway in your network, please enter an IP address within the range

of your network.

Home > Basic Settings > LAN

Using the Conﬁguration Menu

Get IP From:

IP Address:

Subnet Mask:

Default Gateway:

LAN is short for Local Area Network. This is considered your internal network. These are the

IP settings of the LAN interface for the DAP-3520. These settings may be referred to as private

settings. You may change the LAN IP address if needed. The LAN IP address is private to your

internal network and cannot be seen on the Internet.