User's Manual

9D-Link DAP-3320 User Manual
Section 1 - Product Overview
Hardware Overview
Connections
1 Reset button
Hold the reset button for at least 5 seconds to reset the device back to the factory default
settings. All the LEDs will turn on for 2 second and then begin the reboot process.
2 LED A solid green light indicates the device is powered and ready.
3
Reset LAN (PoE)
port
Power is supplied through the LAN cable connected in this port via the Power over Ethernet
Injector.
4
Grounding Wire
Connector
Connects to a grounding wire.
1
2
3
4