User's Manual

14D-Link DAP-3320 User Manual
Section 3 - Conguration
Wireless Settings
Network Name
(SSID):
SSID Visibility:
Auto Channel
Selection:
Channel:
Channel Width:
Authentication:
Enter a name for your wireless network (SSID). For
security purposes, it is highly recommended to
change from the default network name.
Select Disabled if you do not want the SSID of
your wireless network to be broadcasted by the
DAP-3320. Your wireless clients will have to know
the SSID of your DAP-3320 in order to connect
to it.
The Auto Channel Scan setting can be selected to
allow the DAP-3320 to choose the channel with
the least amount of interference.
Indicates the channel setting for the DAP-3320.
The Channel can be changed to t the channel
setting for an existing wireless network or to
customize the wireless network. If you enable
Auto Channel Scan, this option will be grayed out.
Auto 20/40 - Select if you are using both 802.11n
and non-802.11n wireless devices. 20MHz - Select
if you are not using any 802.11n wireless clients.
Refer to “Wireless Security” on page 48 of this
manual for a detailed explanation of the wireless
security options.
This page will allow you to congure the wireless connection
for the DAP-3320. Please be aware that some menu options will
change depending on which type of security setting is used.