User's Manual

11D-Link DAP-3320 User Manual
Section 2 - Installation
A. Connect the Ethernet cable (connected to the AP in STEP 1) from the AP to the “P+DATA OUT” port on the
PoE Injector.
B. Connect an Ethernet cable from a router/switch or PC to the “DATA IN” port on the PoE Injector.
C. Attach the power adapter to the connector labeled “POWER IN” on the PoE Injector, and attach it into an
electrical outlet.
P+DATA OUT
DATA IN
PoE Injector
A
C
B
AP
STEP 2: Connect the AP to Your Network
Power