User's Manual

53
D-Link DAP-2720 User Manual
Section 3 - Conguration
S
tatic IP (Manua
l) is chosen here. Choose this
o
p
tion if you do not have a DHCP server in
your
network, or if you wish to assign a static IP
address to the DAP-2720. When Dynamic IP
(DHCP) is selected, the other fields here will be
grayed out. Please allow about 2 minutes for the
DHCP client to be functional once this selection is
made.
Assign a static IP address that is within the IP
address range of your network.
Subnet Mask : Enter the subnet mask. All devices in
the network must share the same subnet mask.
Enter the IP address of the gateway/router in
your network.
Enter a DNS server IP address. This is usually the
local IP address of your gateway/router.
Enter the RADIUS server’s IP address here
Enter the RADIUS server’s port number here
Enter the RADIUS server’s shared secret here
Select the remote RADIUS server type here.
Currently, only SPAP will be used.
Get IP From :
IP Address :
Subnet Mask :
Gateway :
DNS :
Radius Server:
Radius Port:
Radius Port:
Remote Radius Type: