User's Manual

8D-Link DAP-2682 User Manual
Section 2 - Installation
Basic Installation
Hardware Setup
To power on the DAP-2682, you can use ONE of the following methods:
1. Plug one end of your Ethernet cable into the LAN port of the DAP-2682, and the other end into a port on a 802.3at PoE switch.
2. Purchase separately a DPE-301GI PoE injector if you need to connect the Access Point without a 802.3at PoE Switch.
Congure the access point
To set up and manage the DAP-2682, use one of the following methods:
1. Connect the access point and your computer to the same switch. Manage the access point from the computer.
Enter 192.168.0.50 in the address eld of your browser, which is the default IP address of the access point.
Log in to the Administration Web pages. The default login information is:
Username: admin
Password: (Leave the password eld blank)
2. Connect the access point and your computer via DPE-301GI. Manage the access point from the computer.
Ensure your computer is congured with a static IP address in 192.168.0.0/24 subnet.
Launch a web browser, type the default IP address of the access point (http://192.168.0.50) and then press Enter.
Log in to the Administration Web pages. The default login information is:
Username: admin
Password: (Leave the password eld blank)
OR
Computer
802.3at PoE Switch
DAP-2682
Computer
PoE Injector
Power
Adapter