User's Manual

D-Link DAP-2662 User Manual
5
Features
y Provide Ethernet to Wireless LAN bridge fully IEEE 802.3/u/ab compatible on the Ethernet side and fully interoperable with IEEE 802.11ac and b/g/n
compliant equipment
y Compatible with IEEE 802.11b high rate standard to provide wireless 11Mbps data rate*
y Compatible with IEEE 802.11g higher speed standard to provide wireless 54Mbps data rate*
y Compatible with IEEE 802.11a higher speed standard to provide wireless 54Mbps data rate*
y Compatible with IEEE 802.11n higher speed standard to provide wireless 300Mbps data rate*
y Compatible with IEEE 802.11ac higher speed standard to provide wireless 900Mbps data rate*
y Operation at 2.4~2.5GHz and 5.15~5.85GHz** frequency band to meet worldwide regulations
y Supports IEEE 802.11ac and b/g/n wireless data encryption with 64/128-bit WEP for security
y Supports enhanced security – WPA-PSK and WPA2-PSK, RADIUS client, and Cipher negotiation
y Allows auto fallback data rate for reliability, optimized throughput and transmission range
y Web-based conguration and management
y Supports 802.3af PoE
y Supports 802.3az
y Supports one Gigabit Ethernet port
y AP Mode, WDS Mode, WDS with AP, and Wireless Client Mode
y Supports SNMP v1,v2,v3
y Support Trap server (SNMP v1, v2c)
y Support Central WiFiManager
y Support AP Array and AP Array Setup Tool
* Maximum wireless signal rate derived from IEEE Standard 802.11ac, 802.11g, 802.11a, and 802.11n specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of
network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.
**Please note that operating frequency ranges vary depending on the regulations of individual countries and jurisdictions. The DAP-2662 isn’t supported in the 5.25~5.35GHz and 5.47 ~ 5.725GHz frequency ranges in
some regions.