User's Manual

D-Link DAP-2660 User Manual
77
In this window, users can view and congure the WLAN partition settings. After the conguration, click the Save button to accept the changes
made.
Wireless Band:
Link Integrity:
Ethernet to WLAN
Access:
Internal Station
Connection:
Select the wireless band used here. Options to
choose from are 2.4 GHz and 5 GHz.
Select to Enable or Disable the link integrity
feature here. If the Ethernet connection between
the LAN and the AP is disconnected, enabling this
feature will cause the wireless segment associated
with the AP to be disassociated from the AP.
Select to Enable or Disable the Ethernet to WLAN
access feature here. When disabled, all data from
the Ethernet to associated wireless devices will be
blocked. Wireless devices can still send data to the
Ethernet.
The default value is Enable, which allows stations
to intercommunicate by connecting to a target AP.
When disabled, wireless stations cannot exchange
data on the same Multi-SSID. In Guest mode,
wireless stations cannot exchange data with any
station on your network.
WLAN Partition